GMade 1:10 GS01 Sawback 4WD Scale Crawler Kit

GMade Sawback Scale Crawler rakennussarja.

Hinta
339,00 €
Saatavuus
Heti varastosta
Tuotenumero
GM52000
Rahdituspaino
2kg
Tuotemerkki
GMade
ALV
24%
Saatavuus
1 kpl
Toimitusaika
päivää

Designed from the ground up for scale performance and great looks with or without a body, the Sawback does not disappoint. The steel ladder C channel frame forms the ground work for a great rig and a scale finish. The steel has been nickel plated to resist corrosion, and looks great too! Next add a dust proof receiver box that has been molded to look like a real engine cover. The receiver box also provides a spot to mount your ESC to keep your rig looking clean.

To help push performance to the max, an adjustable battery tray offers the lowest possible center of gravity, while allowing for the use of a variety of packs. The center skid plate is designed to run smoothly over any surface without getting stuck. The suspension of this beast is handled through a combination of aluminum shock absorbers, and leaf spring suspension. The one piece axle housing mounts to these leaf springs with U bolts, completing that scale look. Add a metal differential cover to seal in your solid differential gear for icing on a very delicious cake.

To get the power to the axles, a dust proof transmission is used. The transmission housing features a metal motor mount to keep everything precise and secure. The power is then transmitted to the axles with universal shafts. Just to ensure there is no loss of power every rolling component uses ball bearings. Where is all this power going? Out to the MT-1901 off-road tyres mated to VR01 1.9 inch beadlock wheels. This tyre and wheel combination provides excellent traction in almost any environment. A beautiful clear Lexan scale body with driver seats, steering wheel, shifter, side view mirrors, and a fold down windshield will make anyone green with envy.

Gmade Sawback Features:

  • New Realistic GS01 Chassis with High Strength Nickel Plated Steel C-Channel Side Rails
  • Suspension System with Leaf Springs and TS-03 Aluminum Shock Absorbers
  • Solid Gear Diffs for both Front and Rear Axles
  • Ball Bearings in every rolling component
  • Realistic VR 01 1.9” Beadlock Wheels made from high strength plastic
  • Adjustable Battery Plate
  • Realistic seats, steering wheel, shifter, mirror, and foldable windshield

Spec Check:

  • Width: 218mm
  • Height: 246mm
  • Length: 442mm
  • Wheelbase: 287mm
  • Ground Clearance: 60mm
  • Weight: 1.7kg

Require for completion: 2.4Ghz radio system, motor, speed controller, servo, 7.2v battery and charger and paint for the clear bodyshell.

Yhteensopivat tuotteet

  • Etronix Pulse GFSK Ex2 Sport 2.4GHz 2-Kanavainen Rattiradio Vastaanottimella

    40,00€ Lue lisää
    Tuoteryhmästä Radiot
  • Etronix Sport Tuned Modified Brushed Motor - 35T

    20,49€ Lue lisää
    Tuoteryhmästä Harjalliset 1:10
  • Etronix Sport Tuned Modified Brushed Motor - 45T

    20,49€ Lue lisää
    Tuoteryhmästä Harjalliset 1:10
  • Gens Ace 4000mAh 7.4V 25C LiPo

    35,90€ Lue lisää
    Tuoteryhmästä Kovakuoriset akut
  • Highest CR800 HV Servo - 33.8 kg - 0.15s

    119,00€ Lue lisää
    Tuoteryhmästä Standard Servo
  • Highest DT450 Servo - 14.5 kg - 0.11s

    59,00€ Lue lisää
    Tuoteryhmästä Standard Servo
  • HobbyWing QuicRun 1060 1/10 Waterproof Brushed 60A Electronic Speed Controller - SBEC

    22,67€ Lue lisää
    Tuoteryhmästä Auto
  • Sanwa MX-V 3-Kanavainen 2.4GHz FHSS-2 Radio RX-37W Roiskesuojatulla Vastaanottimella

    98,00€ Lue lisää
    Tuoteryhmästä Radiot

Tuotteen arvostelut

Käytämme evästeitä käyttäjäkokemuksen parantamiseksi. Lue lisää yksityisyydensuojasta. Jatkamalla sivuston käyttöä hyväksyt ehdot.

OK